dpa series ? 16 pin dip ssr ? ratings to 1a @ 280 vac ? scr output ? voltage or current-control input ? zero-crossing (resistive loads) output product selection control voltage 3.5-10 vdc DPA4119 dpa6119 10-35 ma dpa4111 dpa6111 available options output specifications (1) description dpa41xx dpa61xx operating voltage (47-63hz) [vrms] 20-140 20-280 transient overvoltage [vpk] 400 600 maximum off-state leakage current @ rated voltage [marms] 0.01 0.01 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 500 maximum load current [arms] 1.0 1.0 minimum load current [arms] 0.025 0.025 maximum surge current (16.6ms) [apk] 30 30 maximum on-state voltage drop @ rated current [vpk] 1.2 1.2 minimum power factor (with maximum load) 0.5 0.5 input specifications (1) description dpaxx11 dpaxx19 control voltage range - 3.5-10 vdc control current range 10-35 ma - must turn off-state current 1.0 ma - must turn off-state voltage - 1.0 vdc typical input current @ 5 vdc - 15 madc nominal input impedance - 270 ohm maximum turn-on time [msec] 1/2 cycle 1/2 cycle maximum turn-off time [msec] 1/2 cycle 1/2 cycle
general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(2) 3750 vrms minimum insulation resistance (@ 500 vdc)(2) 10 9 ohm maximum capacitance, input/output 2.0 pf ambient operating temperature range -30 to 80c ambient storage temperature range -30 to 125c weight (typical) 0.1 oz. (2.9g) encapsulation thermally conductive epoxy general notes 1) all parameters at 25c un less otherwise specified. 2) dielectric and insulation resistance are measured between input and output 3) off-state dv/dt test method per eia/narm standard rs mechanical specifications pin 8: ac load pin 10: ac load pin 16: +dc control pin 1: -dc control thermal derate information agency approvals ul e116950 csa lr81689 120210
wiring diagram annex - enviromental information
|
